This dust shoe is made of high-quality transparent ABS . The transparent design helps you keep an eye on your operations. Equipped with a nylon brush to maximize vacuum suction and help act as a dust sweep with high dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.

Super Size your CNC: This kit will extend your CNC’s Y-Axis to have 370mm of movement (14.6”), 320mm of travel, easily convert your 3018 to a 3040.

Compatibility: Perfectly compatible with Genmitsu 3018-PROVer, 3018-PROVer Mach3 CNC’s.

Built to suit your needs: It is designed to be a direct upgrade to the 3018 series CNC machines. The enlarged 3040 MDF Spoilboard and 3040 Aluminum Spoilboard are available now.

Simple Assembly: We will take you through the assembly process every step of the way.

Cost-Effective: Save money by putting your current CNC to better use. You don’t need to spend tons of money on a bigger one.

If you have already had the Genmitsu CNC Router 3018-MX3, this controller board can help you turn your MX3 to PROVer.

• This controller board is only compatible with SainSmart Genmitsu CNC 3018-PROVer, 3018-MX3.
• Applicable Software: Grblcontrol (Candle), LaserGRBL or other software that supports GRBL firmware, GRBL firmware version V1.1f.
• USB interface communication, support 3-axis engraving, and laser module.
• Input Interface: X Y Z limit (HOME) interface, Z-axis tool return to zero, emergency stop switch interface, GRBL offline controller interface.
• All control signals are isolated by optocoupler and have strong anti-interference ability.

• Compatible with all Genmitsu CNC 3018 series machines and 1810-PRO. Box dimensions are 18.3 x 15.5 x 12 in (464 x 394 x 304 mm). 
• Lighter and easier to assemble, no screws needed.
• Cut down dust and keep your workspace clean. Perfect for your desktop or workbench.
• Enhanced Safety: Reduce the risk of harmful debris. Safely watch the job process.
• Two Pre-cut Holes for easy access to your offline controller, or other external devices.

Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 36 x 1.5cm (11.8'' x 14.1'' x 0.6'')

Great Stability: The flat and smooth surface can ensure the stability of the cutting material, easy to resurface.

Easy to Use: The spoilboard comes with pre-installed threaded holes. It’s easy to install and can be used with most bench clamping systems.

Compatibility: Perfectly compatible with Genmitsu 3040 extension kit for 3018-PRO & 3018-PROVer series CNC router. Increase rigidity and expand your mounting options. 

Application: Usually used when cutting or carving wooden materials. The spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting.

High Quality: Made of high-strength aluminum alloys. Stable, strong, and durable. 

Smooth Finish: The aluminum base has a smooth finish for easy mounting of spoil boards or jigs.

Easy to Use: The Aluminum Base comes with 4 T-Slots on both sides. It’s easy to install and can be used with most bench clamping systems.

Increase rigidity & expand your mounting options: The aluminum base is a great platform to build on and expand with a spoilboard or specialty jigs.

Application: Combine your Original Aluminum Profile with the one that comes from this kit, and easily extend your 3018 Aluminum Spoilboard to 3040 Aluminum HDF Spoilboard.

You may also like 3040 MDF Spoilboard

Application: This Power Supply is specially designed for Genmitsu 3018 CNC series. Perfectly compatible with 3018-PRO/3018-PROVer/3018-PROVer Mach 3.

New Version: The starting current of this power supply can reach 8-10A, which is high enough to start a more powerful spindle motor. Effectively prevent overload of the power supply.

Safety: With CE/FCC/UL certification. This power supply has over-voltage protection, over-current protection, over-temperature protection, and short-circuit protection. Provide ultimate protection for you and your devices.

High Quality: The built-in smart integrated circuit design keeps the power adapter going against overheat on the unit and charging stably.

Service: With 1 year warranty, and our seller support team always stand behind our products in any way, so please contact us for solution if you have any problems.

• Now Genmitsu 3018-PROVer, 3018-PROVer Mach3, 3018-PRO, already comes with this version of the power supply.

Upgrade your 3018-PROVer / 3018-PROVer Mach3 / 3018-MX3: Upgrade with a more powerful 300-500W motor with a 52mm spindle mount. (Note: this aluminum holder is not compatible with the original GS775 spindle.) there is a Z-axis rotary knob on its top. You can adjust the height of the Z-axis manually without power.

High Quality: The spindle carriage is made of high-quality aluminum for better rigidity and durability. High strength and long service life.

Stable and Reliable Performance: Can hold the motor firmly to increase stability and reduce noise. Limit switches and linear bearings are pre-installed.

Delicate Appearance: All Metal design, drop-in upgrade ready. Matches your PROVer/3018-PROVer Mach3 stock colors with the anodized blue plating. It is practical and ideal for Genmitsu 3018-PROVer and 3018-PROVer Mach3.

Detailed Assembly Guide: With the detailed and clear installation guide in the package you can exchange the spindle hold on your own.

You May Also Like: Aluminum Spindle Holder for 3018-PRO.

This 3040 Extension kit will extend your CNC’s Y-Axis to have 370mm of movement (14.6”), 320mm of travel, easily convert your 3018 to a 3040. Perfectly compatible with Genmitsu 3018-PRO, 3018-PROVer, 3018-PROVer Mach3 CNC’s. (∅10mm lead screw)

It is designed to be a direct upgrade to the 3018 series CNC machines. The enlarged 3040 MDF Spoilboard and 3040 Aluminum Spoilboard are available now.

• Contact Type: NO; Action Type: Momentary; Rating: 125VAC 1A; Terminal Type: 3-Pin Terminals.
• Size: 18mm x 27mm x 14mm (L*W*H); Mounting Hole Dia.: 3.0mm.
• These micro switches features NO contact, momentary action and come with 1m 3-pin cables.
• The limit switches kit is compatible with Genmitsu 3018-PROver/3018-MX3/3018-PROVer Mach3.
• Easy installation and long service life. It’s a perfect upgraded accessory for CNC without a limit switch.

• MATERIAL: The hold down clamp kit is constructed of Zinc-Aluminum Alloy for durability and wear resistance
• DIMENSIONS: This clamp is 50mm length x 20mm width x 56mm height.
• DESIGN: The size of the slot block of the clamp is designed for Genmitsu 3018 series CNC router. It can fit the 3018 series desktop CNC router perfectly.
• FEATURE: The clamp accommodates material up to 30mm and holds it firmly in position. It can hold most of the material for desktop CNC router machines.
• VERSATILITY: This clamp provides exceptional clamping action for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
• This clamp is not compatible with 4030 aluminum spoilboard.

• DC: 24V. Speed: 20000/min. Experience a quick and easy upgrade for your Genmitsu Desktop CNC.
• Pre-installed motor noise suppression PCB provides enhanced performance.
• It's compatible with Genmitsu 3018 Series CNC router.
• Double ball bearing brush. CW/CCW rotation.
• Ease Installation: With the collet holder installed, you don’t need to spend hours in installing the collet holder. Have a quick swap of the OEM Spindle.

If you are looking for a power source replacement motor for power tools, electric equipments and other DIY toys, please check this 775 motor.

• Compatible with all Genmitsu CNC 3018 series machines and 1810-PRO.
• Premium materials, modular design.
• Keep your workspace clean and reduce dust. Perfect for your desktop or workbench.
• Enhanced Safety: Reduce the risk of harmful debris. Safely watch the job process.
• Reduce Noise: Up to 21dB (99% reduction in loudness) quieter during operation, less volume than a normal conversation
• You May Also Like： KABA Lite CNC Enclosure

• This switch is structured compactly and easy to operate.
• Push to stop and lock, reset via software.
• This switch is designed for Genmitsu CNC 3018-PROVer/3018-MX3

If you have already had the Genmitsu CNC Router 3018-MX3, this controller board can help you turn your MX3 to PROVer.

• This controller board is only compatible with SainSmart Genmitsu CNC 3018-PROVer, 3018-MX3.
• Applicable Software: Grblcontrol (Candle), LaserGRBL or other software that supports GRBL firmware, GRBL firmware version V1.1f.
• USB interface communication, support 3-axis engraving, and laser module.
• Input Interface: X Y Z limit (HOME) interface, Z-axis tool return to zero, emergency stop switch interface, GRBL offline controller interface.
• All control signals are isolated by optocoupler and have strong anti-interference ability.

If you have already had the Genmitsu CNC Router 3018-PROver, this controller board can help you turn your PROVer to MX3.

• This controller board is compatible with SainSmart Genmitsu CNC 3018-MX3, 3018-PROVer.
• Suitable for Mach3mill and DrufelCNC, support Windows system, Note: Not applicable to Linux and iOS systems, GRBL related control software is not supported.
• USB interface communication, support 3-axis engraving, and laser module.
• Spindle motor interface can be connected to DC motors which can up to 100W, also suitable for 775 spindle motors.
• All control signals are isolated by optocoupler and have strong anti-interference ability.

• Spindle Motor: New chrome-plated DC motor;
• Install this spindle set into your CNC machines, then your machines can easily engrave light metal or other hard-to-cut materials.
• This spindle comes equipped with air-cooled function, which can work for a long time.
• Radial run out of spindle: 0.01-0.04; Speed: 3000-12000 r/min (12V-3000r/min，24V-6000r/min，36V-9000r/min，48V-12000r/min)
• The output voltage is adjustable, the output current is not adjustable, and the output current is determined by the load.

• This controller can manually control the XYZ-Axis to run on CNC Router 3018-MX3.
• Easy to use, no driver needed. Just connect it on the controller board of the 3018-MX3, then it works.
• The running speed is divided into 3 gears: X1 X10 X100; You can also manually control the running speed by adjusting the hand wheel turning speed.
• The hand wheel is made of metal and 100PPR high-quality encoder, durable and simple to operate.
• SainSmart provides one year warranty on the MPG manual controller, if you have any questions, contact us via support@sainsmart.com.

• This controller can manually control the XYZ-Axis to run on CNC Router 3018-MX3.
• Three-speed modes can be selected on the handle. Low speed mode 50 pulse/s; Middle speed mode 500 pulse/s; High speed mode 5000 pulse/s.
• Easy to use, no driver needed. Just connect it on the controller board of the 3018-MX3, then it works.
• Compact design : 130mm x 60mm x 25mm
• SainSmart provides one year warranty on the MPG manual controller, if you have any questions, contact us via support@sainsmart.com.