• Spindle Motor: New chrome-plated DC motor;
• Install this spindle set into your CNC machines, then your machines can easily engrave light metal or other hard-to-cut materials.
• This spindle comes equipped with air-cooled function, which can work for a long time.
• Radial run out of spindle: 0.01-0.04; Speed: 3000-12000 r/min (12V-3000r/min，24V-6000r/min，36V-9000r/min，48V-12000r/min)
• The output voltage is adjustable, the output current is not adjustable, and the output current is determined by the load.

• DC: 24V. Speed: 20000/min. Experience a quick and easy upgrade for your Genmitsu Desktop CNC.
• Pre-installed motor noise suppression PCB provides enhanced performance.
• Easy Installation for a quick swap of the OEM spindle.
• It's compatible with Genmitsu 3018 Series CNC router. Applied to lathes, mills, car hoists, pumps & conveyors, etc.
• Double ball bearing brush. CW/CCW rotation.

Offline Control

With SainSmart offline controller module, you can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop.

Manual Control

The location of the XYZ Axis can be adjusted manually as the engraving starting point. The spindle open or close mode also can be controlled manually by this module.

Easy to Use

All you have to do is connect the offline module to the GRBL controller board, then you can control the CNC router with this module.

View the Readouts Clearly

This offline controller comes with 1.8" TFT LCD Display so you can view readouts clearly and control the CNC router without connecting to a computer.

Note: This offline module is only compatible with Genmitsu CNC Router 3018-PROVer. It can only be used for our GRBL control card GC3D3-V2.1, other control cards do not support.

• This switch is structured compactly and easy to operate.
• Push to stop and lock, reset via software.
• This switch is designed for Genmitsu CNC 3018-PROVer/3018-MX3

• This controller can manually control the XYZ-Axis to run on CNC Router 3018-MX3.
• Easy to use, no driver needed. Just connect it on the controller board of the 3018-MX3, then it works.
• The running speed is divided into 3 gears: X1 X10 X100; You can also manually control the running speed by adjusting the hand wheel turning speed.
• The hand wheel is made of metal and 100PPR high-quality encoder, durable and simple to operate.
• SainSmart provides one year warranty on the MPG manual controller, if you have any questions, contact us via support@sainsmart.com.

• This controller can manually control the XYZ-Axis to run on CNC Router 3018-MX3.
• Three-speed modes can be selected on the handle. Low speed mode 50 pulse/s; Middle speed mode 500 pulse/s; High speed mode 5000 pulse/s.
• Easy to use, no driver needed. Just connect it on the controller board of the 3018-MX3, then it works.
• Compact design : 130mm x 60mm x 25mm
• SainSmart provides one year warranty on the MPG manual controller, if you have any questions, contact us via support@sainsmart.com.

If you have already had the Genmitsu CNC Router 3018-MX3, this controller board can help you turn your MX3 to PROVer.

• This controller board is only compatible with SainSmart Genmitsu CNC 3018-PROVer, 3018-MX3.
• Applicable Software: Grblcontrol (Candle), LaserGRBL or other software that supports GRBL firmware, GRBL firmware version V1.1f.
• USB interface communication, support 3-axis engraving, and laser module.
• Input Interface: X Y Z limit (HOME) interface, Z-axis tool return to zero, emergency stop switch interface, GRBL offline controller interface.
• All control signals are isolated by optocoupler and have strong anti-interference ability.

If you have already had the Genmitsu CNC Router 3018-PROver, this controller board can help you turn your PROVer to MX3.

• This controller board is compatible with SainSmart Genmitsu CNC 3018-MX3, 3018-PROVer.
• Suitable for Mach3mill and DrufelCNC, support Windows system, Note: Not applicable to Linux and iOS systems, GRBL related control software is not supported.
• USB interface communication, support 3-axis engraving, and laser module.
• Spindle motor interface can be connected to DC motors which can up to 100W, also suitable for 775 spindle motors.
• All control signals are isolated by optocoupler and have strong anti-interference ability.

This controller board is designed for Genmitsu CNC Router 3018, 3018-PRO and 1810 PRO. It can perfectly compatible with SainSmart Blue Laser Module.

• Input voltage: 24V (12-24V).
• Software: GRBL controller, UniversalGcodeSender.
• Stepper motor drive: DRV8825 ，Spindle power: 150W.
• Support XYZ three-axis control, spindle, laser head. Support 3 pin and 2 pin lasers (the 2 pin lasers: please connect the white interface " + s-").
• Support stepper motor: 12V, the maximum current within 2A, recommended within 1.5A and additional heat. (Any stepper motor 42, 57).

• With a mouse click, CNC machines will automatically return to a predefined position, allowing you to easily change and calibrate your tools.
• Z-Axis tool setting touch probe works with Mach3.
• Makes setting tool height a breeze, no more using the paper.
• Auto-Check setting probe.

Offline Control

With SainSmart offline controller module, you can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop.

Manual Control

The location of XYZ Axis can be adjusted manually as engraving starting point. The spindle open or close mode also can be controlled manually by this module.

Two-way Access The File

The engraving filed can be directly recognized once you put the file in the SD card. You can also connect the offline module to the computer by micro USB cable, then store the file directly.

Easy to Use

All you have to do is connect the offline module to the GRBL controller board, then you can control the CNC router with this module.

Compatible with SainSmart Genmitsu CNC Router

This offline module is perfectly compatible with SainSmart Genmitsu CNC Router 3018, 3018-Pro, 1810-Pro. (not compatible with MX-3)

Tips: When Purchased With SainSmart Genmitsu CNC Router, Two Products Will Be Delivered Separately.

Natural Wood

Wooden circles manufactured from natural wood, its smooth surface delivers you comfortable touch feeling.

Ideal for DIY

Genmitsu Natural Wood is a great balance between quality and ease of use. Good for cut, stain, paint, color, writing or engraving.

High Quality

Developed to meet the growing demand for high-quality materials that are suited for DIY jobs and finishes.

Applied Occasions

It can be used as perfect embellishments for decoration, woodworking, wedding planning, birthday, new year, etc.

What You Get

Package included 8 pcs circle-shaped unfinished wood pieces; Diameter: 4.3"-4.7", Thickness: approx. 0.6".