5.5W Compressed FAC Laser Module for PROVerXL 4030 V1 & V2, LC-60A, 4040-PRO, 3030-PROVer MAX with Air Assist Nozzle
Compressed Spot Laser Fixed Focus Module
This 5.5W diode laser with a wavelength of 445nm is specially designed for use with the Jinsoku LC-60A, LE-1620 Laser Engraver and Genmitsu PROVerXL 4030, 4040-PRO CNC Machines.
Specifications
- Laser power: 5.5W
- Spot size: 0.1 x 0.1mm
- Focal length: 30mm
- Laser wavelength: 455 ± 5nm
- Input: 12V / 2.5A
Applications
- Application: Suitable for desktop laser engravers, CNC routers, laser cutters, and 3d printers
- Engravable materials: cardboard, plastic, PCB, aluminum alloy, stainless steel, black metal, etc.
- Cuttable materials: wood, acrylic, cardboard, non-woven fabric, bamboo, laser safe plastic, etc.
Improved Power & Accuracy
Laser Shield Protection
Simply place the focus calibration tool under the laser module and drop the laser head down to it, the laser is then focused.
Stock Air Assist Nozzle
Wider Material Options
Taking advantage of a laser spot compression technology and air-assist nozzle, this upgraded Genmitsu laser module excels in engraving and cutting performance, allowing for a wider range of material selection.
What’s included:
- 1 x Laser Module with Air Assist Nozzle
- 1 x Connection Cable (XH2 54-3P 2.0m)
- 1 x Connection Cable for PROVerXL 4030 1.5m
- 1 x Focus Calibration Tool
- 1 x Safety Goggles (Green, FDA-Certified)
- 1 x Adapter Plate for LE-1620 (62mm)
- 1 x Adapter Plate for LC-60A (72mm)
- 1 x Screw, M3*6
- 1 x User Manual
Precautions
- Please read the instructions carefully before use.
- Direct exposure to the laser beam can cause severe burns and eye damage. Ensure that you are wearing proper laser safety goggles when working in the vicinity of the laser equipment.
- Know the compatibility of the laser module and its maximum input voltage and current so as not to damage the laser.
- When engraving reflective materials such as mirror stainless steel, it is recommended to paint the material surface black with a marker before engraving, preventing laser damage and unwanted laser exposure from the reflective laser beam.
- After long hours of laser working, residue from smoke and dirt will accumulate on the laser lens, cleaning the lens regularly is needed. After working with oily materials, such as pine boards, cleaning the lens in time is necessary.
- Cleaning method: use a cotton swab dipped in alcohol to wipe the lens.
- Please use a smoke exhaust device and ensure that the room or area you are operating the laser is well-ventilated
Performance
- Electrical interface: XH2.54-3 Pin terminal (three-core cable, a: PWM +, b: GND, c: 12VDC)
- Laser shield: A movable laser shield that effectively shields the laser beam without affecting its working position.
- Air assist system: When performing laser cutting jobs, an air assist system blows air through the air nozzle, enhancing the cutting performance and reducing the burn marks. You can remove the air assist nozzle when you are doing non-cutter jobs. This laser kit only comes with an air assist nozzle, to make full use of the air assist feature, you may need to prepare an air assist pump and air tubing yourself.
- Recommended Air Tubing: inner diameter Φ4.0mm, outer diameter of Φ7.0mm)
- Recommended air pump: flow rate 5-8L/min
Which Laser Module is right for you?
3018-PROVer
3018-PRO
3020-PRO MAX
Compatibility
Compressed FAC
Type
5.5W
Laser Power
Air Assist Nozzle
Extension Feature
0.1*0.1mm
Spot Size
Laser Shield & Goggles
Safety
4mm PlyWood
Cutting in One Pass
PROVerXL 4030
LC-60A
LE-1620
Compatibility
Compressed FAC
Type
5.5W
Laser Power
Air Assist Nozzle
Extension Feature
0.1*0.1mm
Spot Size
Laser Shield & Goggles
Safety
4mm PlyWood
Cutting in One Pass
PROVerXL 4030
3020-PRO MAX
4040-PRO
3018-PRO
Compatibility
Fixed Focus
Type
5.5W
Laser Power
X
Extension Feature
X
Spot Size
Goggles
Safety
3mm PlyWood
Cutting in One Pass
3018-PROVer
3018-MX3
LE5040
Compatibility
Fixed Focus
Type
5.5W
Laser Power
X
Extension Feature
X
Spot Size
Goggles
Safety
3mm PlyWood
Cutting in One Pass
