CNC & Engraving
Tools & Instruments
Compatible with PROVerXL 4030: This offline module is only compatible with Genmitsu CNC Router PROVerXL series controllers.
Easy to Use: This offline controller features an easy to read 2.4” Touchscreen display.
Manual Control: Take control of your PROVerXL 4030 through this control module. It’s easier to jog your machine on the fly and toggle your spindle on/off.
Easy File Access and Transferring: Your generated G CODE projects will be recognized simply by adding them to the SD Card.
No PC Offline Control: With the Genmitsu offline controller module, you can control the CNC router without connecting to a computer. Easily load your projects onto the included SD card and have them ready to go without the need of a dedicated laptop or computer.$49.99
This laser module is ideal for engraving, cutting, scribing, and drilling, it can work at full power for 8 hours without any light decay. The service life can be up to 10,000 hours.. Desired patterns can be made easily on the wood or plastic by this unit. Fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules. This module is compatible with PROVerXL4030, 3018-PRO.
YOU MAY ALSO LIKE: Fixed Focus Laser Module for 3018-PROVer.$159.99
Drop in upgrade for your Sainsmart Genmitsu PROVerXL 4030.
High Quality: Made of high-strength aluminum alloys. Strong and durable.
Smooth Finish: The aluminum base has a smooth finish for easy mounting of spoil boards or jigs.
Ease of Use: Each Aluminum Base piece comes with 4 T-Slots on both sides, the standard size is 0.7cm. It’s easy to install and can be used with most bench clamping systems.
Increase rigidity and expand your mounting options. The aluminum base is a great platform to build on and expand with a spoilboard or specialty jigs.
YOU MAY ALSO LIKE: MDF Spoilboard for PROVerXL 4030
$129.99$89.99 SAVE $40.00
- Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 512 x 400 x 15mm ( 20.2” x 15.7” x 0.6”)
- The flat and smooth surface can ensure the stability of the cutting material, easy to resurface.
- Perfectly compatible with Genmitsu PROVerXL 4030 CNC router kit.
- Pre installed threaded inserts for your clamps and fixtures. Easy to install the spoilboard with pre drilled holes.
- We recommend keeping a spare spoilboard so you’re not stuck if the one you’re using gets damaged.
YOU MAY ALSO LIKE: Aluminum Spoilboard for PROVerXL 4030$59.99
This 6060 extension kit will extend all of your XY-Axis, easily convert your PROVerXL 4030 to a 6060 (24”x 24”) with pre-installed axis carriages. Evolve with your CNC, upgrade as you go, start big and get to making more. Drop-in replacement for use with a Genmitsu PROVerXL 4030. The 6060 Aluminum Board is available, MDF Board will also be available soon. Simple assembly with the Installation Guide located in our at the resource center.$349.00
Dust Baffle Included: This kit comes with two dust baffles, which keep the Y-frames on both sides clean to work properly.
High Quality: Made of high strength aluminum alloys. Strong and durable. Compared with MDF Spoilboard, the aluminum base can be used with a Coolant Mist System and will not expand.
Smooth Finish: The aluminum base has a smooth finish for easy mounting of spoilboards or jigs.
Easy to Use: The Aluminum Base comes with 4 T-Slots on both sides. It’s easy to install and can be used with most bench clamping systems.
Increase rigidity and expand your mounting options. The aluminum base is a great platform to build on and expand with a spoilboard or specialty jigs.$159.00
Compatibility: The Dust shoe is compatible with Genmitsu PROVerXL 4030 and other CNC machines with a 69mm diameter spindle. (Not compatible with the original Φ52mm spindle.)
Equipped with Nylon Brush for strong vacuum capability. High dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.
Easy to use: Just simply put the motor into the motor hole and align the dust shoe with the spindle upwards, then fix the motor by tightening the screw.
Magnet Design: Durable, light and flexible, convenient for daily use and maintenance. Easy to assemble and install. Quickly pop off the nylon brush to change bits with the magnet design.
Fully Assembled: You can install it in your PROVerXL 4030 and enjoy your work with a clean workspace once you get it.$54.99
Dimensions: 260mm(L) x 140mm(W) x 40mm(H). Clamping Range: 0-115mm.
Graduated Ruler: Easy to read ruler, there is no need to use another ruler to measure the object when processing.
Right-angle Iron Slider: Located at the upper left corner, it can be easily adjusted to ensure your working stock is square and in just the right position.
V-groove Design: More clamping force to your stock material in place, especially for holding cylindrical objects.
Application: Used for object processing. It can hold various specifications and irregular shapes. Ideal for holding small parts, Jewelry, Watch, Hobby, Model making, Electronics, Home and Work-Bench, and many other applications.$79.99
- Carveco Maker, the first step to making great products on your CNC. Featuring easy-to-use design tools and the ability to create highly accurate, dependable toolpaths; Carveco Maker is a great, affordable option to pair with your new CNC router or engraver.
- Whether you’re a weekend maker, traditional craftsmen, or entirely new to working with a CNC router or engraver, Carveco Maker provides you with all the tools you need to create high-quality 2D and 3D products, quickly and easily.
- Carveco Maker’s simple yet powerful design and make features guide you through the entire process, from conceptual sketch to finished design.
- It’s the perfect introduction for woodworkers, sign-makers or makers looking to produce artistic, personalised products on their own CNC hardware.
- Enjoy the promotional price of $150 for this Carveco Maker 12-Month Subscription. License purchase is non-refundable. The license key will be emailed to you within 24 hours.
This essential kit includes 3 boxes total of 30 CNC router bits and 1 box ER11 spring collet set, satisfying your different CNC needs.
Nano Blue Coat All bits are coated by Nano Blue. This is a new craft at the market. With this new technology, it provides higher hardness and better rustproof than the router bits coat with titanium.
Improve Efficiency Made of hard steel and featured with high hardness, strength, and wear resistance. This makes your job easier and improves work efficiency.
Application It is mainly used for acrylics, plastics, carbon fiber, chipboard, MDF, PCB, solid surface, wood. Read more about our millling bit shopping guide.
$64.99$57.99 SAVE $7.00
- Cutting Edge Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.4/3.0mm), 10Pcs. (0.8-3.0mm Set)
- Cutting Edge Diameter: 1.5-3.175mm (1.5/1.6/1.7/1.8/2.0/2.2/2.4/2.5/3.0/3.175mm), 10Pcs. (1.5-3.175mm Set)
- Hard Steel: With sufficient flexural strength and wear resistance, which ensure high work efficiency.
- Material: Using ultra-fine grained carbide material, with good milling and cutting performance.
- Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches.
- Application: PCB, SMT, CNC, Mold, plastic fiber, carbon fiber, hard wood, printed circuit board, and other precision parts processing. Suitable for milling and cutting(PVC, PCB, acrylic)
$85.99$79.99 SAVE $6.00
▶ 3 hole sizes to keep your ER11 Collets, 1/8” and 1/4” in reach at all times. 85 holes in total. 40 holes with diameter 1/8"; 30 holes with diameter 1/4"; 15 holes for 11.5mm ER11 collets.
▶ Made of high-quality EVA foam, the bit holder is extra durable and long-lasting.
▶ This compact box helps you organize your bits, little gadgets and tools in order, keeping your workbench clear and neat.
▶ Open design allows quick bit change to remove or replace when working with CNC machines.
▶ Tips: In order to avoid injury when removing the router bits, please wear gloves when replacing the router bits, or place the router bits in reverse.$14.99
- Conveniently keep multiple collets ready to go. Changing collets on the fly can be difficult, having a few spare for different size collets makes tool changes easy.
- Package List: 2 x ER11-A Alloy Steel collet clamping nuts; 2 x ER11-A Hardened Steel collet clamping nuts.
- Model: ER11-A; Material: Alloy Steel/ Hardened Steel. Precision ground and hardened. Suitable for ER type tool handle, toolbar, extension bar nut holding drill bit, boring cutter and other tools.
- All nuts have dynamic balance holes, which can prevent wear and noise.
- High precision, high concentricity, extend the service life of the spindle and reduce the rate of bit breakage.
- Application: Great upgrade from the standard clamps included with Genmitsu PROVerXL 4030 or CNC 3040 series and other DIY CNC’s. It can be used on the MDF spoildboard and the aluminum spoildboard that fits the size of the M6 T-slot nut (16 x 16mm).
- Dimensions: 99mm length x 20mm width x 70mm height. (3.9 x 0.8 x 2.8in)
- Working range: The clamp accommodates materials up to 50mm (1.97'') thick and features easy to tighten knobs for quick installation or removal of stock material.
- Sturdy Quality: Constructed of High Strength 6061 Aluminum Alloy with high durability and wear resistance.
- Versatility: Spring loaded and capable of exceptional clamping force, this is a perfect addition to any universal t-track system configuration or assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
- MATERIAL: The hold down clamp kit is constructed of Zinc-Aluminum Alloy for durability and wear resistance
- DIMENSIONS: This clamp is 50mm length x 20mm width x 56mm height.
- DESIGN: The size of the slot block of the clamp is designed for Genmitsu 3018 series CNC router. It can fit the 3018 series desktop CNC router perfectly.
- FEATURE: The clamp accommodates material up to 30mm and holds it firmly in position. It can hold most of the material for desktop CNC router machines.
- VERSATILITY: This clamp provides exceptional clamping action for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
- This clamp is not compatible with 4030 aluminum spoilboard.
$12.99$9.99 SAVE $3.00
This clamp can be used with a T-Slot Aluminum Spoilboard or Threaded MDF Spoilboard of Genmitsu PROVerXL 4030 CNC router kit. It provides exceptional clamping forces for your universal t-track system configurations and assemblies. This clamp system is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
$24.99$23.74 SAVE $1.25