-
9 reviews
Genmitsu ER11 Precision Spring Collet Set
- 7Pcs ER11 Collet Set Gripping Range: 1mm to 7mm (1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm)
- 15Pcs ER11 Collet Set Gripping Range: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm,4mm, 4.5mm,5mm, 5.5mm, 6mm, 6.5 mm, 7mm, 1/4", 1/8".
- Accuracy: 0.02mm (0.0008").
- Material: Made of formulated spring steel.
- Application: Perfect for CNC milling lathe tool and work-holding engraving machine.
- Hardened and precision ground.
$23.99
-
5 reviews
Offline Controller Module for Genmtisu CNC Router 3018, 3018-PRO, 1810-RPO
Offline Control
With SainSmart offline controller module, you can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop.
Manual Control
The location of XYZ Axis can be adjusted manually as engraving starting point. The spindle open or close mode also can be controlled manually by this module.
Two-way Access The File
The engraving filed can be directly recognized once you put the file in the SD card. You can also connect the offline module to the computer by micro USB cable, then store the file directly.
Easy to Use
All you have to do is connect the offline module to the GRBL controller board, then you can control the CNC router with this module.
Compatible with SainSmart Genmitsu CNC Router
This offline module is perfectly compatible with SainSmart Genmitsu CNC Router 3018, 3018-Pro, 1810-Pro. (not compatible with MX-3)
Tips: When Purchased With SainSmart Genmitsu CNC Router, Two Products Will Be Delivered Separately.
$24.99$22.99SAVE $2.00
-
1 review
4PCS T-Track Mini Hold Down Clamp Kit
- MATERIAL: The hold down clamp kit is constructed of Zinc-Aluminum Alloy for durability and wear resistance
- DIMENSIONS: This clamp is 50mm length x 20mm width x 56mm height.
- DESIGN: The size of the slot block of the clamp is designed for Genmitsu 3018 series CNC router. It can fit the 3018 series desktop CNC router perfectly.
- FEATURE: The clamp accommodates material up to 30mm and holds it firmly in position. It can hold most of the material for desktop CNC router machines.
- VERSATILITY: This clamp provides exceptional clamping action for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
- This clamp is not compatible with 4030 aluminum spoilboard.
$12.99$9.99SAVE $3.00
-
5 reviews
SainSmart CNC Router Z-Axis Tool Setting Touch Probe
- With a mouse click, CNC machines will automatically return to a predefined position, allowing you to easily change and calibrate your tools.
- Z-Axis tool setting touch probe works with Mach3.
- Makes setting tool height a breeze, no more using the paper.
- Auto-Check setting probe.
$8.99
-
7 reviews
300W Spindle Upgrade Kit for 3018 Series CNC Machines
- Spindle Motor: New chrome-plated DC motor;
- Install this spindle set into your CNC machines, then your machines can easily engrave light metal or other hard-to-cut materials.
- This spindle comes equipped with air-cooled function, which can work for a long time.
- Radial run out of spindle: 0.01-0.04; Speed: 3000-12000 r/min (12V-3000r/min,24V-6000r/min,36V-9000r/min,48V-12000r/min)
- The output voltage is adjustable, the output current is not adjustable, and the output current is determined by the load.
$99.99
-
8 reviews
2Pcs T-Track Mini Hold Down Clamp Kit for 3018 CNC
Material: It's constructed of high strength aluminum alloy and brass for durability and wear resistance.
Dimensions: This clamp is 65.3mm length x 20mm width x 50mm height. (2.57 x 0.79 x 1.97in).
Feature: The clamp accommodates material up to 1.7'' thick and the ergonomically designed 7-star knob holds the clamp firmly in position.
Versatility: This clamp provides exceptional clamping action for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
Compatibility: This clamp is compatible with all 3018 CNC aluminum platform, not compatible with 4030 aluminum spoilboard.
$19.99$17.99SAVE $2.00
-
2 reviews
CNC Dust Shoe ABS Cover Cleaner for Φ52mm Spindle Motor
Φ52mm DUST SHOE
- Compatible with CNC machines that use a 52mm Diameter Spindle Motor (most 300W-500W spindle motors on the market), including the Genmitsu PROVerXL 4030 and 3020-PRO MAX. Make sure that your spindle diameter is 52mm (1.65″). Dust Shoe for 3018 CNC is Φ42mm.
- This dust shoe is made of high-quality transparent ABS and aluminum . The sweep brush is tidier and firmer than other typical glued options. This kit comes with 2 bottom covers with different length nylon brushes, 20mm and 40mm options for adapting to different length cutting tools. Replacement bottom covers are available for sale. You could simply replace the whole bottom cover when the brush is worn. Don’t need to spend time removing and adding a new brush.
- Two-Piece Magnetic Split Design makes it much easier to replace bits. You only need to pop off the bottom cover when replacing your bits, no tools required , and avoid other complicated procedures.
REPLACEMENT BASE BOTTOM COVER
- This Bottom Cover is made of high-quality transparent ABS and preinstalled 20mm long nylon brush. Compatible with Genmitsu CNC Dust Shoes for 42mm and 52mm diameter spindle motors.
- The 20mm Nylon Brush is perfect for shorter cutting tools, such as V bits. Avoid snags and tangles. Don’t need to spend time reinstalling a new brush. Just replace the whole bottom cover when the brush is worn. One step replacement.
$29.99
-
CNC Blue-Violet Light Fixed Focus Laser Module Kit, For PROVerXL 4030, 3018-PRO, 3020-PRO MAX
This laser module is ideal for engraving, cutting, scribing, and drilling, it can work at full power for 8 hours without any light decay. The service life can be up to 10,000 hours.. Desired patterns can be made easily on the wood or plastic by this unit. Fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules. This module is compatible with PROVerXL 4030, 3020-PRO MAX, 3018-PRO. (How to install?)
YOU MAY ALSO LIKE: Fixed Focus Laser Module for 3018-PROVer | Compressed FAC Laser Module for PROVerXL 4030
$159.99
-
1 review
Emergency Stop Switch for Genmitsu CNC Router 3018-PROVer/3018-MX3
- This switch is structured compactly and easy to operate.
- Push to stop and lock, reset via software.
- This switch is designed for Genmitsu CNC 3018-PROVer/3018-MX3
$9.99
-
1 review
Genmitsu KABA Lite Desktop CNC Enclosure
- Compatible with all Genmitsu CNC 3018 series machines and 1810-PRO. Box dimensions are 18.3 x 15.5 x 12 in (464 x 394 x 304 mm).
- Lighter and easier to assemble, no screws needed.
- Cut down dust and keep your workspace clean. Perfect for your desktop or workbench.
- Enhanced Safety: Reduce the risk of harmful debris. Safely watch the job process.
- Two Pre-cut Holes for easy access to your offline controller, or other external devices.
$69.99
-
Genmitsu 4pcs ER11-A Collet Clamping Nut
- Conveniently keep multiple collets ready to go. Changing collets on the fly can be difficult, having a few spare for different size collets makes tool changes easy.
- Package List: 2 x ER11-A Alloy Steel collet clamping nuts; 2 x ER11-A Hardened Steel collet clamping nuts.
- Model: ER11-A; Material: Alloy Steel/ Hardened Steel. Precision ground and hardened. Suitable for ER type tool handle, toolbar, extension bar nut holding drill bit, boring cutter and other tools.
- All nuts have dynamic balance holes, which can prevent wear and noise.
- High precision, high concentricity, extend the service life of the spindle and reduce the rate of bit breakage.
$17.99
-
Genmitsu CNC Material Bakelite Sheet | 175 x 100 x 5mm | 8PCS
- Material: Bakelite is the plastic made from synthetic components. Machines well with carbide tooling.
- Physical Properties: Extremely stiff, strong and durable.
- High Quality: Developed to meet the growing demand for high-quality materials that are suited for DIY jobs and home uses.
- What You Get: Package included 8 pcs Bakelite sheets.
$24.99$22.99SAVE $2.00
-
CARVE MORE Milling Bits & Spindle Special Bundle
Cost Effective
Buy the CARVE MORE Bundle at an attractive price. This bundle includes:
- 10PCS Nano Blue Coat 20 Degree Engraving Bits ($14.99 value)
- 10PCS 1/8" Shank Micro-Cutting Diameter End Mills Set, EM10-W01($39.99 value)
- GS-775M 24V 20,000 RPM Spindle with Collet Holder Installed ($29.99 value)
- 7Pcs ER11 Collet Set ($11.99 value)
Applicable Materials
Widely used in various materials including plastics, aluminum, circuit board, wood, acrylics, carbon fiber, chipboard, MDF, PCB, as well as other precision parts processing.
7Pcs ER11 Collet Set
Gripping Range: 1mm to 7mm (1mm, 2mm, 3mm, 4mm, 5mm, 6mm, 7mm). Perfect for CNC milling lathe tool and work-holding engraving machine.
GS-775M Spindle with Collet Holder Installed
DC: 24V. Speed: 20000/min. Pre-installed motor noise suppression PCB provides enhanced performance. Experience a quick and easy upgrade for your Genmitsu Desktop CNC. It's compatible with Genmitsu 3018 Series CNC router.
$99.99$89.99SAVE $10.00