Brand: Genmitsu

[Open Box] 3018 φ44mm Brushless Motor Spindle Kit, 24V 12kRPM with Drive Board

Name: [Open Box] 3018 φ44mm Brushless Motor Spindle Kit, 24V 12kRPM with Drive Board
Brand: Genmitsu
SKU: 101-63-BSP24*SEC
Price: 69.99 USD
Availability: OutOfStock

SKU: 101-63-BSP24*SEC

$69.99

-30% ~~$99.99~~ $69.99

US FREE SHIPPING

Save $30.00

Shipping & Tax calculated at checkout.

Product variants

101-63-BSP24*SEC

Quantity

Please check the necessary options first

I agree to the item is not eligible for exchange or return. Details

How to install the brushless spindle? (Read)
The diameter of the spindle is 44mm. Perfect for most 3018 CNC Routers on the market, including Genmitsu 3018-PRO, 3018-PROVer, 1810-PRO.
DC: 24V, No Load Speed: 12000 rpm, Rated Load Speed: 10000 rpm. Up to 26dB quieter during operation. High stability running performance makes it perfect for high precision engraving.
Compared to other normal spindle motors, the Brushless Motor has a much longer service time. It is almost maintenance-free. You just need to do some dusting when necessary.
Experience a quick and easy upgrade for your 3018 CNC Router. The spindle comes with a drive board, USB cable and the Collet Holder is pre-installed already.

View full details

More Quieter

Perfect for most 3018 CNC Routers on the market, including Genmitsu 3018-PRO, 3018-PROVer, 3018-PROVer Mach3, 3018-MX3, 1810-PRO. The diameter of the motor is 44mm. （Note: The stock spindle holder of the 3018 CNC machine could hold the spindle whose diameter is between 42mm and 44mm ). The brushless spindle motor is much quieter than other normal motors, up to 26dB quieter during operation.

Long Service Time

The brushless design enables a much longer service life of about 50,000 hours.

Easy Upgrade

This brushless spindle motor comes with a drive board, USB cable and the Collet Holder is pre-installed already. One step replacement.

More Info

Specifications:

Rated Voltage: 24V DC
Voltage Range: 18-24 V DC
Rated Load: 0.142Nm
Rotation Direction: CW as viewed from output shaft
Operating Position: Output shaft for vertical
No Load Speed: 12000rpm±10%
Rated Load Speed: 10000rpm±10%
Weight:404g
Number of Poles: 6
Number of Phase: 3
Driving Method: 3 phase full wave rectified (PWM)

What's included

1x Spindle Motor (Collet not included)
1x Drive board
1x 200mm length cable
1x 800mm length cable
1x 200mm Dupont cable
1x User Manual

This brushless spindle motor does not require an additional power supply. You just need to plug it into the control board of your CNC router (please refer to the wiring diagram). If you want to expand the potential use of the brushless spindle, an additional power supply is needed to support up to 400W.

Also, it does not require additional hardware to control the speed. You can control the speed in Candle.

Install the collet
Step 1 - Pop the collet into the ER11 nut
Step 2 - Insert the bit into the collet. Make sure that the collet is locked tightly and its plane is aligned with the plane of the ER11 Nut (Learn More).
Step 3 - Put the ER11 nut back in the ER11 chunk
Step 4 - Tighten the ER11 nut with wrenches

Your cart is empty

Deal of the week

Deal of the week

SHOPPING CART

Subtotal

[Open Box] 3018 φ44mm Brushless Motor Spindle Kit, 24V 12kRPM with Drive Board