Super easy to assemble and start in minutes. Bigger engraving area (200mm X 160mm) than similar machines. Compatible with Lightburn/laserGRBL, etc. 

Advanced Motherboard with Test fire button enables you to easily locate and pre-run your project, it comes with XY limit switch for auto zero; 

Z-axis is height adjustable, it can expand your projects with a Rotary accessory or work with thicker materials.

Application: The laser module is ideal for engraving, cutting, scribing, and drilling. Desired patterns can be made easily on the wood or plastic by this unit. This Laser Module is only compatible with models in OPTIONS. Please select the CNC model you have.

Fixed Focus: The fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules.

Longer Service Life: The fixed focus laser module can work at full power for 8 hours without any light decay. The service life can be up to 10,000 hours. 

Excellent Heat Dissipation: Equipped with a large aluminum heatsink and cooling fan, this can help the heat dissipate fast and ensure the laser module works continuously.

Industrial Grade Design: It is designed for industrial laser engraving machine, it adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring reliability, high stability, high efficiency, low noise, and excellent laser beam quality. (UK plug is not included)

YOU MAY ALSO LIKE: Compressed Spot Fixed Focus FAC Laser Module

This laser module is ideal for engraving, cutting, scribing, and drilling, it can work at full power for 8 hours without any light decay. The service life can be up to 10,000 hours.. Desired patterns can be made easily on the wood or plastic by this unit. Fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules. This module is compatible with PROVerXL 4030, 3020-PRO MAX, 3018-PRO.  (How to install?)

YOU MAY ALSO LIKE: Fixed Focus Laser Module for 3018-PROVer  |  Compressed FAC Laser Module for PROVerXL 4030

• Improved Power & Accuracy
• Stock Air Assist Nozzle
• Laser Shield Protection
• Compatible with Jinsoku LC-60A, LE-1620 , Genmitsu PROVerXL 4030 .

Improved Power & Accuracy: This new laser module has a focal spot of 0.1mm x 0.1mm much smaller and consistent than current generation modules, allows for a leap in power and accuracy. It can cut 4mm plywood in one pass.

Stock Air Assist Nozzle: Light-weight aluminum air nozzle delivers improved engraving speed and quality, protects your optics from smoke and dust for better performance and laser lifespan.

Longer Operation Life: Fixed focus laser diode with upgraded heat dissipation will let the module operate for extended periods with a longer operation life.

UV Laser Shield Protection: The laser head comes with a laser shield to filter laser radiation and avoid accidental laser exposure for safer operation.

Compatibility: This laser module is only compatible with Genmitsu 3018-PRO, 3018-PROVer, 3020-PRO MAX CNC Router

Cut Faster and Deeper: Equip an air-assist system on your laser engraver or laser cutter to enhance cutting by blowing residual smoke away from the workpiece for increased laser power and efficiency.

Better Lens Protection: The air assist nozzle can protect your laser lens from smoke residue buildup, improving its longevity and cutting efficiency.

Clean and Smooth Finish: The air assist nozzle regulates the laser beam to be more precise and the airflow from the air pump helps cool down the heat generated, they combined to provide you a clean burn and cut finish.

Adjustable Air Pressure: Find the optimal air pressure for your different working projects and tune it to the best with this Genmitsu air pump.

Compatibility: This air assist kit is compatible with Genmitsu Jinsoku LE-1620, LC-60A Laser Engraver and Genmitsu Fixed Focus Laser Upgrade Module. Please consult with SainSmart technical support if you are not sure wether this air pump is compatible with your machine.

This is a LightBurn license key for GCode controllers (DIY / hobby). It allows installing on up to two computers, PC, Mac, or Linux. The key will be emailed to you (this may take up to 24 hours) and can be applied to the trial version to unlock the software. 

See the Download/Trial Page for software downloads.

The GCode version supports Cohesion3D, Smoothieware, Grbl, Marlin, and Grbl-LPC based controllers. 

Please use the trial period to test it with your hardware to be sure it will work for you.

• Tips: License purchase is non-refundable. The license key will be emailed to you within 12 hours. 
• This license is excluded from all promotions and discount codes. 
• Valid for one year.

The Genmitsu Laser Rotary Roller is easy to set up requiring the proper software. The kit is plug and play and can be used to engrave cylindrical objects like kettles and cups.

Width Adjustment: 5 Roller Positions. Each gear is 15mm. The adjustable range is 30-90mm wide.

Motor: NEMA17 34mm Stepper Motor.

Supported Dimensions: Cylinder diameter 22-125mm, length 20-220mm (material length/material diameter should be over 1.0).

Compatible Laser Engravers: Genmitsu and most other kinds of Desktop Laser Engravers where you can adjust the Z height or reposition the base to accommodate the rollers required clearance.

❓ How to Use Your Rotary Axis for the LE5040 with LaserGRBL？

This Special Bundle Kit Includes

• Genmitsu CNC Router 3018-PRO ($270 value)
• 5.5W Blue Laser Module ($150 value)
• Genmitsu Offline Controller ($25 value)
• LightBurn GCode License Key($40 value)
• Nano Blue Router Bits Essential Kit($57 value)
• 3-Month Carveco Maker Subscription ($45 Value)

This is the latest version of CNC Router 3018-PRO, equipped with an all-new design controller board that provides better heat dissipation. Our new power adapter has been redesigned, with CE, FCC & PSE certifications, that ensures complete protection for you and your machines. The built-in smart integrated circuit design keeps the power adapter going against overheat on the unit and charging stably.

3-Month Carveco Maker Subscription Is Included (a $45 Value)

Please subscribe to our newsletter so that you can receive the FREE 3-Month Subscription Link after ordering the CNC router.

New Version

Genmitsu CNC Router PRO is an upgraded version of Genmitsu CNC Router. All components do not need to be positioned, which greatly reduces the difficulty of assembly and improves the working accuracy. Moreover, the base height is raised to 4cm for a better stability.

Integrated

With an integrated mainboard and custom software, communication between the software and hardware is seamless by design.

Software

The Genmitsu uses Grbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there’s no lack of support and resources available when you get stuck.

Versatile

Capable of cutting all types of plastics, soft aluminum, woods, acrylics, PVCs, and PCBs, the Genmitsu can be used on a wide range of projects and materials.

Simple Assembly

Assembly instructions are provided, but if you get stuck, check out the SainSmart Resource Center or contact us with any questions that arise.

*Join SainSmart Genmitsu CNC Router Facebook Group.

- Included Hardware (over $533 value) 
✔ Genmitsu CNC Router 3018-PROVer ($349 value)

✔ Genmitsu Offline Controller ($25 value)

✔ Blue-Violet Light Fixed Focus Laser Module ($159 value)

- Included Software ($85 value, non refundable) 

✔ 3-Month Carveco Maker Subscription ($45 Value)

✔ LightBurn GCode License Key ($40 value)

• The 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 15 minutes out of the box. Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful but silent Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.
• Take control of your 3018-PROVer Desktop CNC machine with controls at your fingertips. The 1.8” display will clearly display readouts and provide manual control of your mill without any computer. If a project gets out of hand the PROVer has an emergency stop control that is very visible and easy to access for the immediate shutdown of your machine.
• Please subscribe to our newsletter so that you can receive the FREE 3-Month Subscription Link after ordering the CNC router.
• *Join SainSmart Genmitsu CNC Router Facebook Group.

Clean and Smooth Finish: The air assist nozzle regulates the laser beam to be more precise for a clean burn and cut finish.

Better Lens Protection: The air assist nozzle can protect your laser lens from smoke buildups, improving its longevity and cutting efficiency.

Industrial Grade Design SainSmart Blue Laser Module is designed for the industrial laser engraving machine, it adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring with reliability, high stability, high efficiency, low noise, and excellent laser beam quality.

Excellent Heat Dissipation Equipped with large aluminum heatsink and cooling fan, this can help the heat dissipate fast and ensure the laser module works continuously.

Easy to Use No instructions needed, just plug it to the laser port of the driver board, then it works.

Focus Adjustable The focus of the laser lens can be adjustable according to your need. This operation can be done by spinning the laser lens.

Application The laser module is ideal for engraving, cutting, scribing, and drilling. Desired patterns can be made easily on the wood or plastic by this unit.

You May Also Like：Laser module kit for 3018-PROVer, LE5040

The Endurance 10 Watt (10000 mW) laser “Invincible” module (add-on) with 445 nm wavelength for any 3D printer / CNC machine brings ultra abilities to your 3D printer or CNC machine.

• Laser Optical Power Impulse Output is 10000mW ± 15%.
• Has TTL (PWM) and allows different laser power output.
• High beam quality.
• Reliable and stable power output.
• A universal upgrade for your 3D printer / CNC machine or an XY plotter.
• Cut and Engrave on almost all surfaces.
• Compatible with most CNC frames and boards or 3D printers. (Compatiable with 3018 CNC & LE5040 Laser Engraver)

Note: This is a reselling product, payment will be direct to Endurance Lasers LLC.

Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality.

Adjustable Focus: Users can adjust the focus by rotating the laser head according to the working distance to find the optimal spot size.

Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve air flow, all of them contribute a fast and efficient heat dissipation, allowing for prolonged service life.

Easy to Use: Just clip the module magnetically to the print head, wire it to the motherboard, and installation is done. No firmware upgrade is needed.

Compatibility & Application: The laser module is compatible with Ender-3, Ender-3 Pro, Ender-3 Max, Ender 5 Series, CR-10 and printers with controllable fan ports. It can be used to engrave wood, leather, paper, and bamboo.

Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality.

Fixed Focus: Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. The unique convenient focusing unit can quickly and accurately fix the focus and make the best engraving effect.

Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve air flow, all of them contribute a fast and efficient heat dissipation, allowing for prolonged service life.

Full Protection: Upgraded with a  new safety cover that meets FDA Class 4 safety level requirements to prevent laser damage to eyes and skin.

Compatibility and Application: The laser module is compatible with Ender-3 S1 and Ender-3 S1 Pro. It can be used to engrave wood, leather, paper, and bamboo.

Genmitsu new laser machine - Jinsoku LC-40, LC-60A are available now. (Learn More)

High Efficiency Genmitsu LE5040 delivers a position accuracy of 0.1 mm, with low noise and a top cutting speed of 10000mm/min, which is five times faster than 3018 with laser module, so you can always get the finely detailed patterns and precision needed for your projects.

Applicable Materials Capable of handling a variety of materials such as leather, wood, acrylic, MDF, fabric, cardboard, bamboo, anodized aluminum, etc. It’s easy to cut and engrave designs with Genmitsu LE5040.

Large Working Area This machine offers a cutting area of 500 x 400mm (19.7 x 15.7”), making it the ideal CNC laser engraver for everything from home use to starting a small business.

Excellent 5.5w Laser Module The laser module adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring with reliability, high stability, high efficiency, low noise, and excellent laser beam quality.

Software The LE5040 uses LaserGrbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.

Perfect compatible system Use LaserGRBL or Light.Burn (this is the most popular paid engraving software in the world, very easy to use). Supports Windows XP, 7, 8, 10, Mac OS and Linux.

This Special Bundle Kit Includes:

• Genmitsu LE5040 CNC Laser Engraver Machine($349 value)
• LightBurn GCode License Key($40 value)

High Efficiency

Genmitsu LE5040 delivers a position accuracy of 0.1 mm, with low noise and a top cutting speed of 10000mm/min, which is five times faster than 3018 with laser module, so you can always get the finely detailed patterns and precision needed for your projects.

Applicable Materials

Capable of handling a variety of materials such as leather, wood, acrylic, MDF, fabric, cardboard, bamboo, anodized aluminum, etc. It’s easy to cut and engrave designs with Genmitsu LE5040.

Large Working Area

This machine offers a cutting area of 500 x 400mm (19.7 x 15.7”), making it the ideal CNC laser engraver for everything from home use to starting a small business.

Excellent 5.5w Laser Module

The laser module adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring with reliability, high stability, high efficiency, low noise, and excellent laser beam quality.

Software

The LE5040 uses LaserGrbl, high performance, open-source software for controlling movement, and runs on Arduino. Its dependability and simplicity make Grbl an industry standard, so there's no lack of support and resources available when you get stuck.

*Join SainSmart Genmitsu Facebook Group.

Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality.

Adjustable Focus: Users can adjust the focus by rotating the laser head according to the working distance to find the optimal spot size.

Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve air flow, all of them contribute a fast and efficient heat dissipation, allowing for prolonged service life.

Easy to Use: Just clip the module magnetically to the print head, wire it to the motherboard, and installation is done. No firmware upgrade is needed.

Compatibility & Application: The laser module is compatible with Ender-3, Ender-3 Pro, Ender-3 Max, Ender 5 Series, CR-10 and printers with controllable fan ports. It can be used to engrave wood, leather, paper, and bamboo.

The Genmitsu Laser Rotary Roller is easy to set up requiring the proper software. The kit is plug and play and can be used to engrave cylindrical objects like kettles and cups.

Width Adjustment: 5 Roller Positions. Each gear is 15mm. The adjustable range is 30-90mm wide.

Motor: NEMA17 34mm Stepper Motor.

Supported Dimensions: Cylinder diameter 22-125mm, length 20-220mm (material length/material diameter should be over 1.0).

Compatible Laser Engravers: Genmitsu and most other kinds of Desktop Laser Engravers where you can adjust the Z height or reposition the base to accommodate the rollers required clearance.

❓ How to Use Your Rotary Axis for the LE5040 with LaserGRBL？