-
178 reviews
Genmitsu 3018-PROVer Semi Assembled CNC Router Kit
- Current Owner? Upgrade Your 3018-PROVer (SHOP)
- The 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 15 minutes out of the box. Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful but silent Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.
- Take control of your 3018-PROVer Desktop CNC machine with controls at your fingertips. The 1.8” display will clearly display readouts and provide manual control of your mill without any computer. If a project gets out of hand the PROVer has an emergency stop control that is very visible and easy to access for the immediate shutdown of your machine.
- Please subscribe to our newsletter to receive the FREE 3-Month Subscription.
$349.00
-
6 reviews
Genmitsu 3018-PROVer Laser Machine Special Bundle CNC Router Kit
- Included Hardware (over $533 value)
✔ Genmitsu CNC Router 3018-PROVer ($349 value)✔ Genmitsu Offline Controller ($25 value)
✔ Blue-Violet Light Fixed Focus Laser Module ($159 value)
- Included Software ($85 value, non refundable)
✔ 3-Month Carveco Maker Subscription ($45 Value)
✔ LightBurn GCode License Key ($40 value)
- The 3018-PROVer is the latest version of the 3018 Desktop CNC DIY Kit Series. Now Pre-assembled and no fuss with assembly taking less than 15 minutes out of the box. Still based on open-source Grbl v1.1 the PROVer has stepped up to more powerful but silent Toshiba TB6S109 drivers with added life and performance along with added Optocouplers to protect your mainboard from hard stops without risk of damage and eliminate signal noise for more consistent projects and longevity.
- Take control of your 3018-PROVer Desktop CNC machine with controls at your fingertips. The 1.8” display will clearly display readouts and provide manual control of your mill without any computer. If a project gets out of hand the PROVer has an emergency stop control that is very visible and easy to access for the immediate shutdown of your machine.
- Please subscribe to our newsletter so that you can receive the FREE 3-Month Subscription Link after ordering the CNC router.
- *Join SainSmart Genmitsu CNC Router Facebook Group.
$618.00$569.00SAVE $49.00
-
Upgraded Offline Controller Module for Genmitsu CNC & Laser Machine
- Compatible with Genmitsu CNC Router 3018-PROVer, Laser Engraving Machine LE5040, Jinsoku LE-1620, Jinsoku LC-60A
- Control your CNC Router or Laser Engraving Machine without connecting a computer. Your CNC or Laser Engraving Machine can be placed wherever you want and run your projects untethered.
- The upgraded offline controller can jog each axis continuously with a long press of the button. You now don’t need to move the axis with small fixed increments by pressing the button repeatedly. It makes the operation easier and saves you time.
- You easily toggle your spindle on/off and process the Z-Axis tool setting. You don’t need to use your project gcode on your SD card for these functions.
- This upgraded offline controller has improved its compatibility with gcode. It even can recognize some of the non-standard codes, effectively preventing interruptions or misalignment when engraving.
$49.99
-
26 reviews
CNC Blue-Violet Light Fixed Focus Laser Module Kit, For Genmitsu CNC
Application: The laser module is ideal for engraving, cutting, scribing, and drilling. Desired patterns can be made easily on the wood or plastic by this unit. This Laser Module is only compatible with models in OPTIONS. Please select the CNC model you have.
Fixed Focus: The fixed focus distance is 20mm. Compared with the adjustable focus laser module, the light spot of the fixed focus laser module is smaller. At the same power, the fixed focus laser module can cut 3mm linden wood in one pass, not possible with current adjustable laser modules.
Longer Service Life: The fixed focus laser module can work at full power for 8 hours without any light decay. The service life can be up to 10,000 hours.
Excellent Heat Dissipation: Equipped with a large aluminum heatsink and cooling fan, this can help the heat dissipate fast and ensure the laser module works continuously.
Industrial Grade Design: It is designed for industrial laser engraving machine, it adopts an intelligent feedback control circuit, external ACC constant current driving Mode. Featuring reliability, high stability, high efficiency, low noise, and excellent laser beam quality. (UK plug is not included)
YOU MAY ALSO LIKE: Manual Fixed Focus Laser Module for Genmitsu 3018-PRO
$159.99
-
7 reviews
300W Spindle Upgrade Kit for 3018 Series CNC Machines
- Spindle Motor: New chrome-plated DC motor;
- Install this spindle set into your CNC machines, then your machines can easily engrave light metal or other hard-to-cut materials.
- This spindle comes equipped with air-cooled function, which can work for a long time.
- Radial run out of spindle: 0.01-0.04; Speed: 3000-12000 r/min (12V-3000r/min,24V-6000r/min,36V-9000r/min,48V-12000r/min)
- The output voltage is adjustable, the output current is not adjustable, and the output current is determined by the load.
$99.99
-
9 reviews
Genmitsu Aluminum Spindle Holder for 3018-PROVer
Upgrade your 3018-PROVer / 3018-PROVer Mach3 / 3018-MX3: Upgrade with a more powerful 300-500W motor with a 52mm spindle mount. (Note: this aluminum holder is not compatible with the GS775 47mm spindles such as the stock spindle and the 20K spindle for the Genmitsu 3018 router.) there is a Z-axis rotary knob on its top. You can adjust the height of the Z-axis manually without power.
High Quality: The spindle carriage is made of high-quality aluminum for better rigidity and durability. High strength and long service life.
Stable and Reliable Performance: Can hold the motor firmly to increase stability and reduce noise. Limit switches and linear bearings are pre-installed.
Delicate Appearance: All Metal design, drop-in upgrade ready. Matches your PROVer/3018-PROVer Mach3 stock colors with the anodized blue plating. It is practical and ideal for Genmitsu 3018-PROVer and 3018-PROVer Mach3.
Detailed Assembly Guide: With the detailed and clear installation guide in the package you can exchange the spindle hold on your own.
You May Also Like: Aluminum Spindle Holder for 3018-PRO.
$119.99$99.99SAVE $20.00
-
Safety Equipment Set, with Glasses, Gloves and Earplugs, for Indoor and Outdoor Work, Woodworking,
- Affordable: With glasses, gloves and earplugs a set, it's cost-effective for you. You can get full protection during both indoor and outdoor work.
- Advanced Hand Protection:These work gloves have been specially designed using cutting-edge firm grip, anti-slip Nitrile coating with cut resistance, providing ultimate protection while delivering unparalleled dexterity and control.
- Ideal Eye Protection: Light yet rugged and protective. Protective wrap around design shields from harm. Protect your eyes from exposure to an unexpected chemical splash, flying debris, spray, fluid or saliva droplets.
- Noise Reduction Earplugs: Protect your hearing from loud noise and high damaging decibel levels, avoiding depression and tinnitus. Designed with a comfortable shape that adjusts your ear, fits well and stays well in your ear, easy to insert.
- Application: Ideal for indoor or outdoor work, general maintenance, construction, landscaping, industrial work, woodworking, metal work, and lab work.
$24.99
-
Woodworking Angle Protractor Set, for all building geometry trades
- Necessary tool: Woodworking protractors & ruler is an indispensable tool for woodworkers and mechanics for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles easily, which will bring much convenience to your work.
- Easy to use: This protractor rotates a full 180 degrees for measuring any odd angles. With the square ruler you can quickly and easily measure whether the material or anything is right angle.
- Durable: Made of high-quality Stainless Steel with a black anodized finish, which is moisture-proof, rust-proof and corrosion-resistant, ensures longer durability and abrasion resistance.
- Widely Applications: Perfect for students, machinists, carpenters and woodworking hobbyists, vehicle maintenance and repairing, construction, drawing for draw radial lines, setting bevels and transferring angles.
- Great gift for dads, men and women who work in woodworking, construction, engineering, ect.
$24.99$19.99SAVE $5.00
-
8 reviews
2Pcs T-Track Mini Hold Down Clamp Kit for 3018 CNC
Material: It's constructed of high strength aluminum alloy and brass for durability and wear resistance.
Dimensions: This clamp is 65.3mm length x 20mm width x 50mm height. (2.57 x 0.79 x 1.97in).
Feature: The clamp accommodates material up to 1.7'' thick and the ergonomically designed 7-star knob holds the clamp firmly in position.
Versatility: This clamp provides exceptional clamping action for your universal t-track system configurations and assemblies. It is ideal for work holding, positioning, and fixturing for woodworking or metalworking, including routers, drill presses, CNC, table saws, jigs, panels, vertical mills, and more.
Compatibility: This clamp is compatible with all 3018 CNC aluminum platform, not compatible with 4030 aluminum spoilboard.
$19.99$17.99SAVE $2.00
-
CNC Aluminum Vacuum Table for 3018-PROVer Series
The vacuum table is solid aluminum, which has high stability and excellent suction to help prevent warping. It is perfect for engraving thin materials or workpieces that require high precision. Works well with a properly sized vacuum pump. A perfect match Vacuum Pump is also available.
Perfectly compatible with Genmitsu 3018PROVer; 3018-PROVer mach3. You can use it to replace the original spoilboard of the machine.
You May Also Like: KABA CNC Enclosure | 300W Spindle Motor | Aluminum Spindle Holder
$99.99
-
2 reviews
CNC MDF Spoilboard with Scale Grid for 3018 CNC Router
This MDF spoilboard is redesigned with scale 1-cm grids and 24 holes to fit most sizes of clamps, which is flexible for your configuration. The size is 300 x 180 x 12mm (11.81x 7.09x 0.47 in), it is compatible with most 3018 CNC routers on the market. (eg. Genmitsu 3018-PRO, 3018-PROVer, 3018-PROVer Mach3)
A spoilboard is a disposable workbench mounted above the router’s table. Usually used when cutting or carving wooden materials.The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting.
You May Also Like: Hold Down Clamps | Z-Axis Touch Probe | KABA Enclousre
$24.99
-
7 reviews
MDF Spoilboard for 3018 CNC Router, 11.8'' x 7'' x 0.5'', M6 Holes (6mm)
- A spoilboard is a disposable workbench mounted above the router's table. It can protect the router table from damage as well as being an expendable surface that can participate in workholding.
- Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 18 x 1.2cm (11.8'' x 7'' x 0.5'')
- Compatibility: Perfectly compatible with Genmitsu 3018 series CNC router kit.
- Easy to Use: Easy to install the spoilboard with pre-installed threaded holes (6mm) for fixture clamps. Can be used with most bench clamping systems.
- Application: Usually used when cutting or carving wooden materials. The MDF spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting
$24.99$19.99SAVE $5.00
-
62 reviews
3040 Y-Axis Extension Kit for 3018 Series CNC Router
This 3040 Extension kit will extend your CNC’s Y-Axis to have 370mm of movement (14.6”), 320mm of travel, easily convert your 3018 to a 3040. Perfectly compatible with Genmitsu 3018-PRO, 3018-PROVer, 3018-PROVer Mach3 CNC’s. (∅ 8mm lead screw)
It is designed to be a direct upgrade to the 3018 series CNC machines. The enlarged 3040 MDF Spoilboard and 3040 Aluminum Spoilboard are available now.
$59.99
-
1 review
3040 MDF Spoilboard for 3018 CNC Extension Kit
Material: MDF (Medium-Density Fibreboard). MDF is very dense translating into more weight with enhanced strength and durability. Size is 30 x 36 x 1.5cm (11.8'' x 14.1'' x 0.6'')
Great Stability: The flat and smooth surface can ensure the stability of the cutting material, easy to resurface.
Easy to Use: The spoilboard comes with pre-installed threaded holes. It’s easy to install and can be used with most bench clamping systems.
Compatibility: Perfectly compatible with Genmitsu 3040 extension kit for 3018-PRO & 3018-PROVer series CNC router. Increase rigidity and expand your mounting options.
Application: Usually used when cutting or carving wooden materials. The spoilboard is used as a base to cut on so that your CNC table is not damaged by the cutting tools. It can ensure the stability of the cutting material, thereby achieving more precise cutting.
$39.99
-
11 reviews
3040 Aluminum HDF Spoilboard for 3018 CNC Extension Kit
High Quality: Made of high-strength aluminum alloys. Stable, strong, and durable.
Smooth Finish: The aluminum base has a smooth finish for easy mounting of spoil boards or jigs.
Easy to Use: The Aluminum Base comes with 4 T-Slots on both sides. It’s easy to install and can be used with most bench clamping systems.
Increase rigidity & expand your mounting options: The aluminum base is a great platform to build on and expand with a spoilboard or specialty jigs.
Application: Combine your Original Aluminum Profile with the one that comes from this kit, and easily extend your 3018 Aluminum Spoilboard to 3040 Aluminum HDF Spoilboard. (Not Genmitsu 3018 CNC? Please contact us before buying.)
You may also like 3040 MDF Spoilboard
$69.99
-
8 reviews
CNC Dust Shoe ABS Cover Cleaner, for 3018 Series CNC Router Φ42mm Spindle Motor
Φ42mm Dust Shoe
This dust shoe is made of high-quality transparent ABS . The transparent design helps you keep an eye on your operations. Equipped with a nylon brush to maximize vacuum suction and help act as a dust sweep with high dust removal efficiency. Keep your machine and work area clean while cutting, drilling, and carving.
You may also like the Dust Shoe for Φ52mm spindle motor (compatible with PROVerXL 4030 & 3020-PRO MAX)
Replacement Base Bottom Cover
- This Bottom Cover is made of high-quality transparent ABS and preinstalled 20mm long nylon brush. Compatible with Genmitsu CNC Dust Shoes for 42mm and 52mm diameter spindle motors.
- The 20mm Nylon Brush is perfect for shorter cutting tools, such as V bits. Avoid snags and tangles. Don’t need to spend time reinstalling a new brush. Just replace the whole bottom cover when the brush is worn. One step replacement.
$19.99$18.99SAVE $1.00
-
1 review
Genmitsu KABA Lite Desktop CNC Enclosure
- Compatible with all Genmitsu CNC 3018 series machines and 1810-PRO. Box dimensions are 18.3 x 15.5 x 12 in (464 x 394 x 304 mm).
- Lighter and easier to assemble, no screws needed.
- Cut down dust and keep your workspace clean. Perfect for your desktop or workbench.
- Enhanced Safety: Reduce the risk of harmful debris. Safely watch the job process.
- Two Pre-cut Holes for easy access to your offline controller, or other external devices.
$69.99
-
23 reviews
Genmitsu KABA Desktop CNC Enclosure
- Compatible with all Genmitsu CNC 3018 series machines and 1810-PRO.
- Premium materials, modular design.
- Keep your workspace clean and reduce dust. Perfect for your desktop or workbench.
- Enhanced Safety: Reduce the risk of harmful debris. Safely watch the job process.
- Reduce Noise: Up to 21dB (99% reduction in loudness) quieter during operation, less volume than a normal conversation
- You May Also Like: KABA Lite CNC Enclosure
$119.99
-
1 review
Emergency Stop Switch for Genmitsu CNC Router 3018-PROVer/3018-MX3
- This switch is structured compactly and easy to operate.
- Push to stop and lock, reset via software.
- This switch is designed for Genmitsu CNC 3018-PROVer/3018-MX3
$9.99
-
5 reviews
SainSmart CNC Router Z-Axis Tool Setting Touch Probe
- With a mouse click, CNC machines will automatically return to a predefined position, allowing you to easily change and calibrate your tools.
- Z-Axis tool setting touch probe works with Mach3.
- Makes setting tool height a breeze, no more using the paper.
- Auto-Check setting probe.
$8.99
-
3 reviews
Power Supply Adapter for 20,000 RPM Spindle, for 3018 CNC
Application: This Power Supply is specially designed for Genmitsu 3018 CNC series. Perfectly compatible with 3018-PRO/3018-PROVer/3018-PROVer Mach 3.
New Version: The starting current of this power supply can reach 8-10A, which is high enough to start a more powerful spindle motor. Effectively prevent overload of the power supply.
Safety: With CE/FCC/UL certification. This power supply has over-voltage protection, over-current protection, over-temperature protection, and short-circuit protection. Provide ultimate protection for you and your devices.
High Quality: The built-in smart integrated circuit design keeps the power adapter going against overheat on the unit and charging stably.
Service: With 1 year warranty, and our seller support team always stand behind our products in any way, so please contact us for solution if you have any problems.
- Now Genmitsu 3018-PROVer, 3018-PROVer Mach3, 3018-PRO, already comes with this version of the power supply.
$39.99
-
10 reviews
Essential Bundle Kit, 0.8-3.0mm, V20, 2-Flute, Flat Nose, ER11 Collet, 37Pcs
This essential kit includes 3 boxes total of 30 CNC router bits and 1 box ER11 spring collet set, satisfying your different CNC needs.
Nano Blue Coat All bits are coated by Nano Blue. This is a new craft at the market. With this new technology, it provides higher hardness and better rustproof than the router bits coat with titanium.
Improve Efficiency Made of hard steel and featured with high hardness, strength, and wear resistance. This makes your job easier and improves work efficiency.
Application It is mainly used for acrylics, plastics, carbon fiber, chipboard, MDF, PCB, solid surface, wood. Read more about our millling bit shopping guide.
Do you need a box to hold your bits and put them in order? Take one here.
$64.99$57.99SAVE $7.00
-
14 reviews
MC40A, 1/8" Shank, CNC Cutter Milling Carving Bit Set, 40-PCS
High Quality -- The Genmitsu end mills are made of ultra-fine 0.2μm tungsten carbide steel alloy that can keep continuous machining 800 minutes. Moreover, its Nano Blue Coating /Titanium Coating with high hardness and heat resistance enables the tool's cutting edge to retain crucial sharpness and lubricity. This provides longevity and produces cutting results of the highest quality.
2-Flute Spiral Flat Nose & Ball Nose End Mills -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
Two End Mill Sets -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8 - 3.0mm (0.8/1.0/1.2/1.4/1.6/1.8/2.0/2.2/2.5/3.0mm), Cutting Length: 17mm, Overall Length: 38mm, with Nano blue and Titanium coating.
Applicable Materials -- Widely used in various materials including plastics, aluminum, circuit board, wood, as well as other precision parts processing.
Wide Compatibility --The MC40A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. Just make sure you select the correct-sized collet for your device.
$34.99
-
MC30A, 1/8" Shank, Carbide Milling Cutter Bit Set, 30 PCS
- High Quality: Made of Tungsten Carbide Steel Alloy, which is high wear resistance and anti-impairment. Moreover, its Nano Blue Coating / Titanium Coating with high hardness and heat resistance provides longevity and produces cutting results of the highest quality.
- O Flute & 2-Flute Ball Nose End Mill -- Shank Diameter: 3.175mm, Cutting Diameter: 3.175mm, Cutting Length: 17mm, Overall Length: 38mm.
- Corn-shaped End Mill Set -- Shank Diameter: 3.175mm, Cutting Diameter: 0.8mm, Cutting Length: 8mm, Overall Length: 38mm.
- Applicable Materials: Suitable for such as PCB, SMT, CNC, MDF, ABS, PVC, Mold, acrylic, nylon, resin, plastic fiber, carbon fiber, density board, hardwood, plywood, printed circuit board, and other precision parts processing and milling.
- Wide Compatibility: The MC30A end mills are compatible with most desktop CNC machines, such as the Genmitsu 3018 Series, as well as other industrial CNC machines. To learn more about how to choose the right bits to meet your needs, please find the Comparison Chart (CNC Bits Buying Guide) at the Product Guides and Documents Section below.
$32.99
- 1
- 2